AVSIG: CIS Logon wwswsigarch.jpg (7236 bytes)

✈ . . . . . . ✈ . . . . . ✈ . . . . ✈ . . . ✈ . . ✈ . ✈ . . ✈ . . . ✈ . . . . ✈ . . . . . ✈ . . . . . . Touch-and-Go to our Live Forum (This is a Read-only Archive of the 2004-2017 AVSIG Forum)


AVSIG Discussion Sections >> Hardware/Software

Pages: 1 | 2 | >> (show all)
Ron Rosenfeld (EPM)
Public Guest


Reged: 04/28/04
Posts: 2772
Loc: Maine
CIS Logon
      #129301 - 10/09/06 05:16 AM

I need some troubleshooting help.

I have been trying to access a CIS dial-up connection unsuccessfully. I can
access it using the hyperterminal program, but when I try to set up a PPP
connection to use the internet, I have not been successful.

The modem is an internal modem supposedly connected to COM3 (according to the
Modem dialog box).

I have been using the script file that comes with Windows, but it fails and
writes an error message to a log:

C:\WINDOWS\system32\ras\cis.scp(16) : 'set port' : an internal error occurred.

Any suggestions on troubleshooting would be appreciated.

Thanks.

--ron

--------------------
--ron


Post Extras: Print Post   Remind Me!   Notify Moderator  
Jeff Hartmann CIC
Top Gun


Reged: 05/18/04
Posts: 7323
Loc: Chico,CA
Re: CIS Logon [Re: Ron Rosenfeld (EPM)]
      #129305 - 10/09/06 05:32 AM

While we are on CIS,

When I try to login on CS.com after the password page it just rapidly clicks back and forth from login to home, stopping after about 10 cycles....?? No login.

This only happens on the road, home login is normal...

I guess I need to try a login at home on the lap top.
(thinking out loud mode)

--------------------
Jeff

nothing clever to say right now...


Post Extras: Print Post   Remind Me!   Notify Moderator  
Russell Holton
AVSIG Member


Reged: 07/07/05
Posts: 14136
Re: CIS Logon [Re: Ron Rosenfeld (EPM)]
      #129319 - 10/09/06 10:38 AM

What commands are in the script? I think I'd start by pulling out any command that set baud rate. Maybe comment out ones that change the bits/parity.

Post Extras: Print Post   Remind Me!   Notify Moderator  
Ron Rosenfeld (EPM)
Public Guest


Reged: 04/28/04
Posts: 2772
Loc: Maine
CIS Logon [Re: Russell Holton]
      #129323 - 10/09/06 11:30 AM

Russell,

I tried that first, but if the port is not set properly, the characters are
garbage and the script, which is interactive, cannot (and does not) function
as it can never do the handshaking required.

Logging onto the internet via a dial-up compuserve connection is a wierd
thing. You have to set the port differently for logon than for the
interaction with the internet.

Here is the script.

(If you have a Windows machine, you'll probably find cis.scp in
c:\windows\system32\ras)

====================================
;
; This is a script file that demonstrates how
; to establish a PPP connection with Compuserve,
; which requires changing the port settings to
; log in.
;


; Main entry point to script
;
proc main

; Set the port settings so we can wait for
; non-gibberish text.

set port databits 7
set port parity even

transmit "^M"

waitfor "Host Name:"
transmit "CIS^M"

waitfor "User ID:"
transmit $USERID, raw
transmit "/go:pppconnect^M"

waitfor "Password: "
transmit $PASSWORD, raw
transmit "^M"

waitfor "One moment please..."

; Set the port settings back to allow successful
; negotiation.

set port databits 8
set port parity none

endproc
=================================

--------------------
--ron


Post Extras: Print Post   Remind Me!   Notify Moderator  
Jim Brownfield [KFUL]
Public Guest


Reged: 05/22/04
Posts: 1774
Loc: KFUL, Fullerton, CA
Re: CIS Logon [Re: Ron Rosenfeld (EPM)]
      #129329 - 10/09/06 12:01 PM

Ron,

You might try checking the "Show Terminal Window" under the "Secutiry" tab to see if you can connect manually.

Modems can be frustrating things. Assuming Windows scripting works like most scripting, you might change the 'waitfor "Host Name"' to 'waitfor "ame:"' (the first part may be getting trashed, you really only care about the end part anyway). You might try changing the first "even" parity setting to "none." I'm not a Windows modem scripting expert (I'd have to go look everything up), but if you can, place a retry around the 'Transfer "^M"...Waitfor "Host Name:".

Good luck. I don't envy all the trial-and-error testing you'll have to do. <G>

Jim


Post Extras: Print Post   Remind Me!   Notify Moderator  
Ron Rosenfeld (EPM)
Public Guest


Reged: 04/28/04
Posts: 2772
Loc: Maine
Re: CIS Logon [Re: Jim Brownfield [KFUL]]
      #129336 - 10/09/06 01:00 PM

Jim,

Thanks for the suggestions. I've tried most of those things and the problem is that the port parity and bits aren't set right, the information from CIS, during LOGON, is garbled. Hence it is problematic whether the script will work. Then, after logging on, I must set the parity and bits back to the default, in order to communicate with a PPP connection.

I haven't been able to do this from the Terminal window.

The other scripting commands probably work OK; it's the port setting command that is getting flummoxed.

--------------------
--ron


Post Extras: Print Post   Remind Me!   Notify Moderator  
R. Cox
Public Guest


Reged: 04/29/04
Posts: 711
Re: CIS Logon [Re: Ron Rosenfeld (EPM)]
      #129342 - 10/09/06 01:55 PM

Ron, I ran into the same error message. In my case a June, '06 Windows Update broke the script. A late June, '06 update fixed it.

Here's the update:
http://www.microsoft.com/technet/security/bulletin/ms06-025.mspx

Here's a discussion:
http://community.compuserve.com/n/pfx/forum.aspx?msg=43451.1&nav=messages&webtag=ws-cssoftware

--------------------
--Rick


Post Extras: Print Post   Remind Me!   Notify Moderator  
Mase Taylor
Top Gun


Reged: 04/29/04
Posts: 9446
Loc: SOCAL
Re: CIS Logon [Re: R. Cox]
      #129355 - 10/09/06 04:02 PM

Quote:

Ron, I ran into the same error message. In my case a June, '06 Windows Update broke the script. A late June, '06 update fixed it.





This is correct. The MS update broke dial-up networking for a lot of services. You can see this thread on CS. As originally issued, KB911280 broke dial-up networking. It was then revised a few days later; the new revision corrects the problem. You need to uninstall the update and then reinstall.

--------------------
Fly The Airplane As Far Into The Crash As Possible. - Bob Hoover 1922-2016 R.I.P.


Post Extras: Print Post   Remind Me!   Notify Moderator  
Ron Rosenfeld (EPM)
Public Guest


Reged: 04/28/04
Posts: 2772
Loc: Maine
CIS Logon [Re: R. Cox]
      #129381 - 10/09/06 05:34 PM

Rich,

That is very interesting and certainly explains the problem I have been
having. It seems the fix would be to uninstall the original security update,
and then reinstall the later version.

Unfortunately, the only instructions for uninstalling are via the control
panel, and I've got no Security Updates listed there prior to 9/14/2006.

--------------------
--ron


Post Extras: Print Post   Remind Me!   Notify Moderator  
Ron Rosenfeld (EPM)
Public Guest


Reged: 04/28/04
Posts: 2772
Loc: Maine
Re: CIS Logon [Re: R. Cox]
      #129392 - 10/09/06 06:19 PM

Well, I'm now on hold with MS Support as they try to figure out how I can UNinstall that update (since it's not showing up in the Control Panel). What a pita -- first to find the problem, which I wouldn't have been able to do without AVSIG, and now to fix it.

--------------------
--ron


Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1 | 2 | >> (show all)



Extra information
0 registered and 39 anonymous users are browsing this forum.

Moderator:  Mike Overly 

Print Topic

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Topic views: 2595

Rate this topic

Jump to

Contact Us AVSIG

Powered by UBB.threads™ 6.5.5

Logout   Main Index    AVSIG Aviation Forum